Wwise Help

Once you enable the Envelope, you can preview the result by opening the source editor (next figure). If you are unhappy with the precision and/or number of tracked envelope points, you can change the value of the sensitivity slider in the Envelope Tracking group box (see Figure 19, “HDR tab in Property Editor”). You can work with a group of sounds by enabling the envelope and setting the sensitivity on a higher-level sound structure, an actor-mixer for example. Note that the effect of the sensitivity is dependent on the original audio data, and may therefore be different for different variations of similar sounds. You can also edit the Envelope manually for each sound; set the sensitivity control so that you obtain a curve that is close to the desired result, and move, remove, or add new points.

	Note
	The tracked envelope points only appear on the waveform if the sound is routed to a bus that has HDR enabled.

Figure 18. Source editor in RMS mode, with Envelope display

Figure 19. HDR tab in Property Editor