Wwise SDK 2019.1.11
_ak_common_defs_8h_source
Version
menu_open
link
Wwise SDK 2019.1.11
|
AkCommonDefs.h
53 // Native format currently the same on all supported platforms, may become platform specific in the future
66 AkUInt32 uBlockAlign :10;///< Number of bytes per sample frame. (For example a 5.1 PCM 16bit should have a uBlockAlign equal to 6(5.1 channels)*2(16 bits per sample) = 12.
85 /// Note that mono configurations have one channel which is arbitrary set to AK_SPEAKER_FRONT_CENTER,
177 #define AK_MAKE_CHANNELCONFIGOVERRIDE(_config,_order) ((AkInt64)_config.Serialize()|((AkInt64)_order<<32))
214 /// Depending on when this function is called, you may get metering data computed in the previous frame only. In order to force recomputing of
216 /// \return Vector of linear peak levels, corresponding to each channel. NULL if AK_EnableBusMeter_Peak is not set (see IAkMixerPluginContext::SetMeteringFlags() or AK::SoundEngine::RegisterBusMeteringCallback()).
220 /// Depending on when this function is called, you may get metering data computed in the previous frame only.
221 /// \return Vector of linear true peak levels, corresponding to each channel. NULL if AK_EnableBusMeter_TruePeak is not set (see IAkMixerPluginContext::SetMeteringFlags() or AK::SoundEngine::RegisterBusMeteringCallback()).
225 /// Depending on when this function is called, you may get metering data computed in the previous frame only. In order to force recomputing of
227 /// \return Vector of linear rms levels, corresponding to each channel. NULL if AK_EnableBusMeter_RMS is not set (see IAkMixerPluginContext::SetMeteringFlags() or AK::SoundEngine::RegisterBusMeteringCallback()).
230 /// Get the mean k-weighted power value in this frame, used to compute loudness (as defined by ITU-R BS.1770).
231 /// Depending on when this function is called, you may get metering data computed in the previous frame only.
232 /// \return Total linear k-weighted power of all channels. 0 if AK_EnableBusMeter_KPower is not set (see IAkMixerPluginContext::SetMeteringFlags() or AK::SoundEngine::RegisterBusMeteringCallback()).
250 /// Audio buffer structure including the address of an audio buffer, the number of valid frames inside,
310 inline void AttachInterleavedData( void * in_pData, AkUInt16 in_uMaxFrames, AkUInt16 in_uValidFrames, AkChannelConfig in_channelConfig )
328 /// Convert a channel, identified by a single channel bit, to a buffer index used in GetChannel() below, for a given channel config.
329 /// Standard indexing follows channel bit order (see AkSpeakerConfig.h). Pipeline/buffer indexing is the same but the LFE is moved to the end.
335 , AkUInt32 in_uChannelIdx ///< Channel index in standard ordering to be converted to pipeline ordering.
341 AKASSERT( in_channelConfig.eConfigType == AK_ChannelConfigType_Standard ); // in_channelConfig.HasLFE() would not have returned true otherwise.
343 AkUInt32 uIdxLFE = AK::GetNumNonZeroBits( ( AK_SPEAKER_LOW_FREQUENCY - 1 ) & in_channelConfig.uChannelMask );
357 /// \remarks When using a standard configuration, use ChannelMaskToBufferIndex() to convert channel bits to buffer indices.
383 /// The invalid frames are made valid (zeroed out) for all channels and the validFrames count will be made equal to uMaxFrames.
399 /// Attach deinterleaved data where channels are contiguous in memory. Allocation is performed outside.
400 AkForceInline void AttachContiguousDeinterleavedData( void * in_pData, AkUInt16 in_uMaxFrames, AkUInt16 in_uValidFrames, AkChannelConfig in_channelConfig )
404 /// Detach deinterleaved data where channels are contiguous in memory. The address of the buffer is returned and fields are cleared.
433 AkUInt16 uMaxFrames; ///< Number of sample frames the buffer can hold. Access through AkAudioBuffer::MaxFrames().
AkForceInline bool HasLFE() const
Returns true if there is an LFE channel present.
Definition: AkCommonDefs.h:288
AkForceInline bool IsChannelConfigSupported() const
Definition: AkSpeakerConfig.h:648
AkSampleType * GetChannel(AkUInt32 in_uIndex)
Definition: AkCommonDefs.h:362
Interface to retrieve metering information about a buffer.
Definition: AkCommonDefs.h:206
AkForceInline bool HasData() const
Check if buffer has samples attached to it.
Definition: AkCommonDefs.h:323
AkForceInline AkChannelConfig GetChannelConfig() const
Definition: AkCommonDefs.h:293
virtual AkReal32 GetKWeightedPower()=0
AkForceInline void * DetachContiguousDeinterleavedData()
Detach deinterleaved data where channels are contiguous in memory. The address of the buffer is retur...
Definition: AkCommonDefs.h:405
AkForceInline AkUInt32 NumChannels() const
Get the number of channels.
Definition: AkCommonDefs.h:282
Definition: AkSpeakerConfig.h:505
static AkUInt32 StandardToPipelineIndex(AkChannelConfig in_channelConfig, AkUInt32 in_uChannelIdx)
Definition: AkCommonDefs.h:330
AkForceInline bool IsChannelConfigSupported() const
Definition: AkCommonDefs.h:142
void RelocateMedia(AkUInt8 *in_pNewMedia, AkUInt8 *in_pOldMedia)
Definition: AkCommonDefs.h:419
AkUInt16 uValidFrames
Number of valid sample frames in the audio buffer.
Definition: AkCommonDefs.h:440
virtual AK::SpeakerVolumes::ConstVectorPtr GetTruePeak()=0
AkUInt16 uMaxFrames
Number of sample frames the buffer can hold. Access through AkAudioBuffer::MaxFrames().
Definition: AkCommonDefs.h:433
AkForceInline void Clear()
Clear the channel config. Becomes "invalid" (IsValid() returns false).
Definition: AkSpeakerConfig.h:536
AkForceInline void AkMemSet(void *pDest, AkInt32 iVal, AkUInt32 uSize)
Platform Independent Helper.
Definition: AkPlatformFuncs.h:336
AkForceInline AkUInt32 GetNumNonZeroBits(AkUInt32 in_uWord)
Definition: AkPlatformFuncs.h:110
AkForceInline AkUInt32 GetBitsPerSample() const
Definition: AkCommonDefs.h:95
AkUInt32 uBlockAlign
Number of bytes per sample frame. (For example a 5.1 PCM 16bit should have a uBlockAlign equal to 6(5...
Definition: AkCommonDefs.h:66
AkForceInline AkUInt32 GetInterleaveID() const
Definition: AkCommonDefs.h:116
AkForceInline bool operator!=(const AkAudioFormat &in_other) const
Definition: AkCommonDefs.h:157
AkForceInline AkUInt32 GetBlockAlign() const
Definition: AkCommonDefs.h:102
AkForceInline void AttachContiguousDeinterleavedData(void *in_pData, AkUInt16 in_uMaxFrames, AkUInt16 in_uValidFrames, AkChannelConfig in_channelConfig)
Attach deinterleaved data where channels are contiguous in memory. Allocation is performed outside.
Definition: AkCommonDefs.h:400
Definition: AkCommonDefs.h:255
AkForceInline bool operator==(const AkAudioFormat &in_other) const
Definition: AkCommonDefs.h:147
AkForceInline void * GetInterleavedData()
Definition: AkCommonDefs.h:304
virtual AK::SpeakerVolumes::ConstVectorPtr GetPeak()=0
AkForceInline AkUInt32 GetNumChannels() const
Definition: AkCommonDefs.h:72
virtual ~IAkMetering()
Virtual destructor on interface to avoid warnings.
Definition: AkCommonDefs.h:209
bool CheckValidSamples()
const AkReal32 * ConstVectorPtr
Constant volume vector. Access each element with the standard bracket [] operator.
Definition: AkSpeakerVolumes.h:51
virtual AK::SpeakerVolumes::ConstVectorPtr GetRMS()=0
void AttachInterleavedData(void *in_pData, AkUInt16 in_uMaxFrames, AkUInt16 in_uValidFrames, AkChannelConfig in_channelConfig)
Attach interleaved data. Allocation is performed outside.
Definition: AkCommonDefs.h:310
void SetAll(AkUInt32 in_uSampleRate, AkChannelConfig in_channelConfig, AkUInt32 in_uBitsPerSample, AkUInt32 in_uBlockAlign, AkUInt32 in_uTypeID, AkUInt32 in_uInterleaveID)
Definition: AkCommonDefs.h:123
Was this page helpful?
Need Support?
Questions? Problems? Need more info? Contact us, and we can help!
Visit our Support pageTell us about your project. We're here to help.
Register your project and we'll help you get started with no strings attached!
Get started with Wwise