Contents Editor: Master Audio, Audio, and Auxiliary Busses

This Contents Editor gives you quick access to some of the most common properties associated with the child busses of the selected master audio, Audio, or Auxiliary Bus.

Relative Properties

Interface Element

Description

Click the Configure Columns... shortcut (right-click) option from the column header band.

The Object Property Settings opens. Specify which columns to display and their order.

Voice Volume

The attenuation (level or amplitude) applied on the current object before it is routed to a bus or sent to an Auxiliary Bus. Refer to Understanding the Voice Pipeline for more information about volumes.

Default value: 0
Range: -400 to 400
Units: dB

	Note
	The default slider range is from -96 to +12 dB. You can go over those limits by entering the value directly or by rolling the mouse while the focus is on the edit control.

Voice Pitch

The playback speed of an audio object, where:

Pitch 0 = Normal speed.
Pitch 1,200 = 2 x speed.
Pitch 2,400 = 4 x speed.
Pitch -1,200 = 0.5 speed
Pitch -2,400 = 0.25 speed

	Tip
	1,200 cents is equivalent to one octave.

Default value: 0
Range: -2400 to 2400
Units: Cents

Voice Low-pass Filter

A recursive filter that attenuates high frequencies based on the value specified.

The units for this filter represent the percentage of low-pass filtering that has been applied, where 0 means no low-pass filtering (signal unaffected) and 100 means maximal attenuation.

(For more detail, see Wwise LPF Value Cutoff Frequencies .)

Default value: 0
Range: 0 to 100
Units: %

Related Topics

Was this page helpful?

Need Support?

Questions? Problems? Need more info? Contact us, and we can help!

Visit our Support page

Tell us about your project. We're here to help.

Get started with Wwise

Wwise Help