Version

menu_open
Effects Tab: Busses

In the Effects tab for busses, you can apply up to four different Effects to an Audio or Auxiliary Bus. When Effects are applied to a channel-based bus, all incoming audio data is submixed before the Effect chain is applied. The Effects are applied in the same order as they appear in the list.

[Note] Note

In the case of an Effect inserted on an Audio Objects bus, whether or not the incoming data is submixed before processing depends on the particular Effect used. Refer to Using Effects with Audio Objects for further details.

When applying Effects in Wwise, you should be aware that a voice can go through the following three levels of Effects:

  • Up to four Effects can be applied on the voice in the Actor-Mixer or Interactive Music hierarchies. But, keep in mind that child objects can also override their parent objects' Effects.

  • Up to four Effects can be applied to each Audio Bus and Auxiliary Bus in the bus hierarchy output path.

  • Up to four Effects can be applied on the final master bus (the Master Audio or the Master Secondary Bus).

This means that a chain of potentially many Effects will be applied to the final output. There are a couple of options that help manage these Effects:

  • The Mode option allows you to set the Effect as a ShareSet, which allows you to adjust multiple instances of the same Effect in one shot. The Mode can also be set to Custom so that specific settings can be applied to an individual Effect instance, as needed.

  • The Bypass option allows you to essentially remove the Effect. However, you can bring it back, as desired. This is useful in testing, such as in establishing the impact of the Effect. With the use of Bypass Actions, it can also be a good way to remove an Effect for certain game scenarios or events.

Unlike Actor-Mixer or Interactive Music object Effects, bus Effects cannot be rendered.

[Tip] Tip

For the Actor-Mixer or Interactive Music object Effects tab, see Effects Tab: Actor-Mixer and Interactive Music Objects.

General

Interface Element

Description

[name]

The name of the object.

Displays the object's color. Clicking the icon opens the color selector.

Select a color to apply it to the object.

[Note] Note

Selecting the square at the far left of the color selector causes the object to inherit its parent's color. When a color has been explicitly chosen for an object, it is displayed with the palette icon and a yellow triangle in the lower-right corner, as shown.

Controls the Mute and Solo states for the object and shows the implicit mute and solo states for the object.

Muting an object silences this object for the current monitoring session. Soloing an object silences all the other objects in the project except this one.

A bold M or S indicates that the Mute or Solo state has been explicitly set for the object. A non-bold M or S with faded color indicates that the object's Mute or Solo state was implicitly set from another object's state.

Muting an object implicitly mutes the descendant objects.

Soloing an object implicitly mutes the sibling objects and implicitly solos the descendant and ancestor objects.

[Tip] Tip

Hold the Ctrl key while clicking a solo button to exclusively solo the object for which the solo button is associated.

[Note] Note

Mute and Solo are designed to be used for monitoring purposes only and are not persisted in the project or stored in the SoundBanks.

Indicates the number of elements in your project that contain direct references to the object. The icon is displayed in orange when references to the object exist, and in gray when no references exist.

Selecting the button opens the Reference View with the object's name in the References to: field.

Notes

Any additional information about the object properties.

Sets the display of the Property Editor's selected tabs. By default, there is one panel displaying only one selected tab. You can, however, click a splitter button to split the panel into two, either side by side or one on top of the other, for two different tabs. The currently selected option is highlighted with a background color.

[Note] Note

You cannot display the same tab in both panels. If you select the tab that is currently displayed in the other panel, then the other panel will automatically display another tab.

[Tip] Shortcuts for selecting tabs

Press Ctrl and the number corresponding to the number of the Property Editor tab you want. For example, Ctrl+4 would select the RTPC tab if that were the fourth visible tab.

Effects

Interface Element

Description

Click the Configure Columns... shortcut (right-click) option from the column header band.

The Configure Columns Dialog opens. Specify which columns to display and their order.

Effects

(Selector)

The list of effects and corresponding instances that can be applied to the bus. The selected effect type is displayed in the Effect column.

To remove an effect, select the None option.

ID

The identification number assigned to the Effect.

Effect

The type of effect applied to the bus, for example, Wwise Compressor, Wwise Matrix Reverb, or Wwise Parametric EQ.

Name

The name of the Effect instance applied to the bus. The effect instance can be a ShareSet or a custom instance of a ShareSet.

All Effect instances for the selected Effect type will appear in the corresponding list.

Prev.

Selects the previous ShareSet in the Effects hierarchy.

Next

Selects the next ShareSet in the Effects hierarchy.

Mode

Determines whether the Effect instance is shared. The mode can either be:

  • Define custom: To create a custom Effect instance whose properties will not be shared between objects.

  • Use ShareSet: To use a ShareSet of an Effect, which means that Effect properties can be shared between objects.

[Note] Converting to a new ShareSet

If you edit an Effect in Define custom Mode, then change the Mode to Use ShareSets, the resulting conflict prompts the Create ShareSet from Custom Object alert dialog. It gives you three options:

  • Convert: Prompts the New Effect dialog where you can create a new ShareSet with the specified Effect Settings.

  • Revert: Clears the Effect Editor and reverts the Effect to the original settings of the ShareSet.

  • Cancel: Returns you to the unaltered Effect Editor with the Mode restored to Define custom.

(Location in Hierarchy)

Displays the location in the Effects hierarchy where the selected ShareSet can be found. If it is a custom instance of the Effect, it will show the name of the custom instance.

Bypass Effect

Determines whether the selected Effect instance is bypassed or not.

Default value: false

Edit

Displays the Effect Editor where you can edit the properties of the selected effect instance in real time.

Bypass Effect

Determines whether the selected Effect instance is bypassed or not.

Default value: false


Was this page helpful?

Need Support?

Questions? Problems? Need more info? Contact us, and we can help!

Visit our Support page

Tell us about your project. We're here to help.

Register your project and we'll help you get started with no strings attached!

Get started with Wwise